N13

SANITARY APPLIANCES/FITTINGS

To be read with Preliminaries/General conditions.

TYPES OF APPLIANCE/FITTING

110

WC PAN AND FLUSHING ARRANGEMENT:

•

Manufacturer: Armitage Shanks, Armitage, Rugeley, Staffordshire WS15 4BT. Tel: 01543 490253, Fax: 01543 491677. Web: www.armitage-shanks.co.uk

•

Type: Close-coupled suite

•

Pan: Antoinette S3150 (156401A), White 01 (WW)

•

Seat: Richmond seat and cover S4035 (68750B1)

•

Pan connector: Panekta to S or turned P trap, finned S4300 (9014000)

•

Flushing arrangement: Antoinette cistern S3875 (17026KR), 6 litres.

•

Other accessories: Domex screws (pair) S9101 (7550BPR)

•

Sealing: DOW CORNING 785 as clause 750

130

URINAL AND CISTERN:

•

Manufacturer: Armitage Shanks, see clause 110

•

Urinal: Contour wall urinal S6110 (261229E), HTM reference UR-H

•

Urinal division with hanger and screw S6120 (2606000), White 01 (WW)

•

Waste/Trap: 1½in plastics domed strainer waste, 50mm unslotted tail S885067 (90568N0 SC)

•

Cistern/Flush pipe(s) complete with automatic syphon, lid and supports/fixings: Conceala automatic cistern 4.5 litres S6215 (4225100)

•

Other accessories: Back inlet spreader S6286 (743449Z)

•

Sealing: DOW CORNING 785 as clause 750

150

BIDET:

•

Manufacturer: Armitage Shanks, see clause 110

•

Type: Antoinette bidet, one central taphole, no douche S4805 (1877B4E)

•

Colour: White 01 (WW) / Chablis 20 (CB) / Honey Moon SW (HM)

•

Water supply fitting(s): Hathaway bidet monoblock mixer with pop-up waste S7530 (9445X00), Chromium plated AA (CP)

•

Waste: Integral with fittings above

•

Trap: Plastics P trap with 75 mm seal, self colour S896567 (71427Q4 SC)

•

Other accessories: Domex screws (pair) S9101 (7550BPR)

•

Sealing: DOW CORNING 785 as clause 750

160

SHELF SINK:

•

Type: Twyford Shelf Sink FC 1160 WH, White – 625 x 550 x 255 mm

•

Taps: SF 5212 CP Pair of ½" chrome plated high-neck taps with extension tubes

•

Waste: WF 4333 CP Chrome plated chain waste, slotted for overflow

•

Trap: WF 8483 XX Plastics P bottle trap

•

Other accessories: SR 3050 XX – 635 mm high x 470 mm deep legs and bearers

•

Sealing: DOW CORNING 785 as clause 750

180

WASH BASIN:

•

Manufacturer: Armitage Shanks, see clause 110

•

Type: Antoinette 56cm basin, two tapholes, chainhole and overflow S2160 (119723S) Colour: White 01 (WW) / Chablis 20 (CB) / Honey Moon SW (HM)

•

Taps: Hathaway basin pillar taps (pair) S7035 (9440400)

•

Waste: Integral with fittings above

•

Trap: Plastics bottle trap with 75 mm seal, self colour S891067 (70237Q4 SC)

•

Other accessories: Isovalve servicing valves S900067 (9060400 SC)

•

Sealing: DOW CORNING 785 as clause 750

230

SHOWER UNIT:

•

Tray:
Manufacturer: Nordic Bathrooms, Trading Estate, Holland Road, Oxted, Surrey RH8 9BZ. Tel: 01883 732400. Fax: 01883 716970.

CAT 800 x 800mm Square shower tray – NS2360.

•

Shower valve:

Manufacturer: Armitage Shanks, see clause 110

Nuastyle surface-mounted thermostatic valve S7810AA (69924AG CP)

•

Waste:

1½ in strainer waste, unslotted, chromium plated S8820AA (90278P3 CP)

•

Trap:

Manufacturer: Hunter Plastics, Nathan Way, London SE28 0AE. Tel: 020 8855 9851, Fax: 020 8317 7764, Email: hunplas@hunterplastics.co.uk Website: www.hunterplastics.co.uk

Shower trap, compact 40mm

•

Enclosure:

Manufacturer: Otto Bock UK Limited, 32 Parsonage Green, Egham, Surrey, TW20 0LD. Tel: 01784 744 900. Fax: 01784 744 929. Email: bockuk@uk.ottobock.de Web: www.ottobock.co.uk

Linido Shower Curtain Rail, Hinged. Ref: LI2641.002.

•

Shower seat:

Manufacturer: Harrison Thompson, Yeoman House, Whitehall Road, Leeds LS12 5JB Tel: 0113 279 5854 Fax: 0113 231 0406 Email:info@yeomanshield.com Web: www.yeomanshield.com

Yeoman GRP Shower Seat, White

•

Sealing: DOW CORNING 786 as clause 750

330

TOWEL RAIL:

•

Manufacturer: Armitage Shanks, see clause 110

Millenia towel rail, chromium plated, S5084AA (64831H8CP)

340

TOILET PAPER HOLDER:

•

Manufacturer: Armitage Shanks, see clause 110

Millenia toilet roll holder, chromium plated, S5090AA (64851H8CP)

380

SMALL BORE MACERATOR/PUMPING UNIT:

•

Manufacturer: KSB Ltd, 2 Cotton Way, Loughborough, LE11 5TF

Tel: 01509 231872 Fax: 01509 215228 Web: www.ksbuk.com

Reference: Mini-Compacta

•

Connection to WC: Shut off gate valve

•

Waste inlet pipe: 1 Nr DN 100 mm direct connector

•

Outlet pipe: 1 Nr DN 100 mm connector

•

Ventilation pipe: DN 70 mm connector

•

Electrical supply: Single phase

WORKMANSHIP

610

INSTALLATION GENERALLY:

•

Assemble and fix appliances and accessories so that surfaces designed to falls drain as intended.

•

Use nonferrous or stainless steel fastenings unless specified otherwise.

•

Wherever possible, fix supply and discharge pipework before appliances. Ensure that appliances are fixed securely to structure and are not supported by pipework.

•

When not specified otherwise, use jointing and bedding compounds recommended by the manufacturers of the appliances, accessories and pipes being jointed or bedded.

•

Prevent use of appliances for any purpose until Practical Completion. Do not stand on appliances.

•

On completion, check for damage and defects and test for satisfactory operation. Replace damaged or defective components and accessories. Check for, and rectify leaks. Remove labels/stickers and clean appliances thoroughly.

613

COMPATIBILITY OF COMPONENTS: Unless specified otherwise, and with the exception of traps, waste fittings and taps, every sanitary assembly must consist of functionally compatible components obtained from a single manufacturer.

620

NOGGINGS/BEARERS: Ensure that noggings, bearers, etc. required to support sanitary appliances and fittings are accurately positioned and securely fixed.

630

TILED BACKGROUNDS (other than splashbacks): Ensure that:

•

Tiling is complete before fixing appliances.

•

Fixings do not overstress tiles.

650

WC PANS:

•

Screw fix floor mounted pans and fit cover caps over screw heads. Unless specified otherwise, do not use mortar or other beddings.

•

Ensure that seat and lid are stable when raised.

670

CISTERNS:

•

Unless specified otherwise obtain cistern operating components from cistern manufacturer. Ensure that ballvalve matches pressure of water supply.

•

Fix at the height recommended by manufacturer unless otherwise specified or shown on drawings.

•

Ensure that overflow pipe is fixed to falls, and located to give visible warning of discharge. Agree position with CA where not shown on drawings.

710

TAPS: Fix securely, making a watertight seal with the appliance. Place hot tap to left of cold tap as viewed by user of appliance.

720

WASTES/OVERFLOWS: Bed in waterproof jointing compound and fix with resilient washer between appliance and backnut.

750

SEALANT POINTING:

•

Manufacturer: DOW CORNING 785 or, where specified, 786

Colour: White

•

Application: As section Z22.